DURKAN Patterned Carpet

	Direct Glue Action Back, Attached Cushion, HPS Backing System, UPS Backing System, UPS Block Backing System, Weldlock, Weldlock Plus, Woven and Woven Interlock

	Double Stick Action Back, HPS Backing System, UPS Backing System, Weldlock, Woven and Woven Interlock

	Durkan Print Installation Guidelines for Corridors and Broadloom Durkan’s Technical Installation Support Department is available for your assistance. Before or during installation, if any problems occur, or if you have any questions, please call 800-833-6954. Durkan highly recommends the use of a Durkan Certified Installer.

	NuSpraylok DK11 Platinum Flooring Adhesive Spray System • Store adhesive at a minimum temperature of 68° F (20° C) for 24 hours prior to installation. • Condition flooring per manufacturer’s recommendations. • Ensure substrate, flooring and surrounding areas are clean and dust free. • Damp-mop substrate if dust is present. • Only use Portland based patching and leveling compounds. • Shake aerosol can

	NuSpraylok DK15 Platinum Flooring Adhesive Spray System • Store adhesive at a minimum temperature of 68° F (20° C) for 24 hours prior to installation. • Condition flooring per manufacturer’s recommendations. • Ensure substrate, flooring and surrounding areas are clean and dust free. • Damp-mop substrate if dust is present. • Only use Portland based patching and leveling compounds. • Shake aerosol can

	NuSpraylok DK10 Standard Flooring Adhesive Spray System • Store adhesive at a minimum temperature of 68° F (20° C) for 24 hours prior to installation. • Condition flooring per manufacturer’s recommendations. • Ensure substrate, flooring and surrounding areas are clean and dust free. • Damp-mop substrate if dust is present. • Only use Portland based patching and leveling compounds. • Shake aerosol can

	NuSpraylok DK14 Standard Flooring Adhesive Spray System • Store adhesive at a minimum temperature of 68° F (20° C) for 24 hours prior to installation. • Condition flooring per manufacturer’s recommendations. • Ensure substrate, flooring and surrounding areas are clean and dust free. • Damp-mop substrate if dust is present. • Only use Portland based patching and leveling compounds. • Shake aerosol can

	PermaLink * These products may be installed using more than one installation format depending on the look that the end user or designer wishes to achieve. Please review the product list under each of the above formats and consult job specifications or the end user to determine which installation format should be used for a particular project. If you have any questions about any of the installation formats, please contact Field Technical Service at 1-800-833-6954 for more information (view pdf)

	SelfLock TDS Lees Self Lock Tile Adhesive is a releasable, pressure sensitive adhesive specially engineered to install carpet tiles in a grid or total glue down installation. This premium adhesive is formulated to facilitate release and re-bonding of carpet tiles while permanently retaining its tack, allowing individual tiles to be lifted out easily and replaced without substantial loss of adhesive properties. MSDS

	Tackless Tackless Installation Action Back, HPS Backing System, UPS Backing System and Woven

	TMG Modular Tile Ecoflex™ Urethane Cushion Backed Carpet Tiles PVC Backed Carpet Tiles Thermoplastic Backed Carpet Tiles Self Lock® Carpet Tiles

	Uniplus System II ActionBac Recommended Adhesives TMG Enpress PSA Adhesive is recommended to adhere the pad to the subfloor. The approximate spread rate is 40 yards per gallon. Lees WetSet Adhesive or NuBroadlok Adhesive is recommended to adhere the carpet to the pad. The approximate spread rate is 6-7 yards per gallon. (view pdf)